Categorías
Conector motor de arranque (Excitador) Toyota
13,46 € 13,46 € 13.46 EUR
Conector 23 PIN Dash AIM / PDM AIM / ECUMASTER
52,03 € 52,03 € 52.03 EUR
Conector SUMI 20Pin Hembra IP67
41,76 € 41,76 € 41.76 EUR
Conector SUMI usado en las instalaciones de motor de los JS P4 y LMS de Ligier
Muy útil para la unión del mazo motor a habitáculo, 20 pin de 15amp
Conector SUMI 20Pin Macho IP67
46,88 € 46,88 € 46.88 EUR
Conector SUMI usado en las instalaciones de motor de los JS P4 y LMS de Ligier
Muy útil para la unión del mazo motor a habitáculo, 20 pin de 15amp
JE-Pistons 2JZ-GE/GTE (9.0:1) 87.00mm Ultra Series
1.865,82 € 1.865,82 € 1865.82 EUR
Disponibilidad dependiendo de fabricación, entre 1 y 6 semanas.
CAN Node L4 8xPWM
62,15 € 62,15 € 62.15 EUR
CAN-L4-PWM is an Adapter Node based on ArudPilot AP_Periph firmware.
Using this adapter to turn DShot capable ESCs into CAN ESCs, including full ESC telemetry. and turn PWM servos into CAN servos.
Specifications
MCU: STM32L431xC, 256KB Flash
1x CAN, DroneCAN Protocol
9x PWM outputs (8x Dshot)
1.5x UARTs
UART1, RX1
UART3, Tx3/ Rx3
ST debug, SWCLK & SWDIO
LED
Blue, Fast blinking, Booting
Blue, Slow blinking, working
Red, 3.3V indicator
Input voltage range: 4.5~5.5V @5V pad/pin
Power consumption: 30mA
Operating Temperatures: -20~80 °C
“Vx” pads are for powering servos via external BEC. “Vx” is not connected to other components on this board.
“Rx1” pads are for ESC Telemetry, DO NOT connect ESC BEC output to Rx1 pad.
Physical
1x JST-GH-4P(SM04B-GHS-TB) for CAN
Board Size: 32mm*25.4mm. 3.5g
Mounting: 20mm. Dia.3mm
3D file : CAN-L4-PWM_STEP.zip
Firmware
ArduPilot AP_Periph MatekL431-Dshot
Update via DroneCAN GUI Tool

Packing:
1x CAN-L4-PWM board
1x JST-GH-4P to JST-GH-4P 20cm silicon wire
Sensor EGT temperatura escape 1200º M6 1m
29,22 € 29,22 € 29.22 EUR
Conector BMW DCT SHIFTER GEARBOX
19,98 € 19,98 € 19.98 EUR
PIGTAIL CRIMPADO Conector BMW DCT SHIFTER
19,98 € 19,98 € 19.98 EUR
Conector DRIVELOGIC BMW DCT SHIFTER
19,17 € 19,17 € 19.17 EUR
Tapón AN10 CIEGO HEMBRA
15,17 € 15,17 € 15.17 EUR
JE-Pistons 2JZ-GE/GTE (9.0:1) 86.50mm Ultra Series
1.865,82 € 1.865,82 € 1865.82 EUR
Disponibilidad dependiendo de fabricación, entre 1 y 6 semanas.
JE-Pistons 2JZ-GE/GTE (9.0:1) 86.00mm Ultra Series
1.865,82 € 1.865,82 € 1865.82 EUR
Disponibilidad dependiendo de fabricación, entre 1 y 6 semanas.
CAN Analyzer v8.00 Compatible REALDASH
54,45 € 54,45 € 54.45 EUR
Basic Function
Support CAN2.0A(Standard) and CAN2.0B(Expansion)

CAN baud rate(5K~1M), customized CAN baud rate.

CAN send and receive data with time tag,can show the receiving data in order,can refresh data easily.

Data can be sent by single frame, multiple frames, manually, regularly, you can even set a certain time to send.

Enhanced Function
Response to data received from a certain ID.

Can check CAN Bus status manually.

Can set to receive from the wanting ID directly, without setting filtering ID or shield ID.

4 working mode

Standard Mode: CAN communication

Loop Mode: Self-testing, in this mode, the analyzer will send and receive data itself, and also send data to CAN Bus.

Quiet Mode: Only use to monitor CAN Bus without influence.

Loop Quiet Mode: Warm testing

Data can be saved as TXT or Excel. Baud rate of virtual COM port can also be modified, default baud rate over 1M, so don’t need to worry about conversion efficiency.

Advanced function
All customized settings saved automatically.

Easy secondary development,only need to handle 1 command.

Transparent Transition function

Software supports English